Print PDF
Favorite
Email
Step 9Sew the torso to the butt.
Start with both pieces wrong side out. In other words, the torso will be turned so the arms are inside, and the butt will be place into the torso with the wrong side facing up and the legs dangling inside.
Line up the bottom seam with one of the torso seams. You'll start sewing in that area. I normally start my stitches right where the seam comes together. That way you know you're right on target.
Sew 1/4 inch from the edge almost all the way around, making sure the seams on the other side line up when you get to them. Pass those seams, and keep sewing until you only have about 2-3 inches still open. Knot off here.
Now turn the robot's body right side out - go slowly - only push a couple of limbs through at a time. Taaaa-daaaa! We're almost done!!
Line up the bottom seam with one of the torso seams. You'll start sewing in that area. I normally start my stitches right where the seam comes together. That way you know you're right on target.
Sew 1/4 inch from the edge almost all the way around, making sure the seams on the other side line up when you get to them. Pass those seams, and keep sewing until you only have about 2-3 inches still open. Knot off here.
Now turn the robot's body right side out - go slowly - only push a couple of limbs through at a time. Taaaa-daaaa! We're almost done!!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
