Print PDF
Favorite
Email
Step 15Twist again
Cut yourself a decent amount of brass rod to work with-here I used about 65mm (2 inches ) to make this one. Using molegrips, pliers or a vice, slowly twist the brass rod in opposite directions.
Make sure they there is plenty of the rod in the jaws to be able to grip the brass while twisting, and maintain a firm grip whilst you do it. Molegrips or a vice are best, as this grip is held in place mechanically rather than by the strength of your hands.
Make sure they there is plenty of the rod in the jaws to be able to grip the brass while twisting, and maintain a firm grip whilst you do it. Molegrips or a vice are best, as this grip is held in place mechanically rather than by the strength of your hands.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
