Make your own radio controled airsoft gun

Step 4 Servos

Now for the servos, one of the servos will be used to rotate the base, while the other will be used to push a switch. First, the one that rotates the base.

This one is fairly self explanatory, just take your servo and in some way mount the turning head on the smaller base. I used a few screws to do this..

The second servo is a bit trickier. First you need to mount that switch that goes to the air soft gun on one of the pieces of wood that is perpendicular to the smaller base. Now comes the hard part. You have to mount the servo so that the turning head will turn and push the switch, this takes a few minutes of tweaking. (The tape might help with this)