Make your own wallet-sized Enigma(tm)-like Machine

Step 3 Cut out a full set of rotors

Cut out one or more sets of rotors, and laminate them if you are using a laminator. 

If you are laminating them, make sure you leave at least 10mm (2/5") between the rotors so that you can cut them out with a few millimeters (about 1/8") around them so that they stay nice and strong.

Also, if you are laminating, after you cut the rotors out I find it helpful to cut a little nick into the index position (the double fat black or white mark on the outside of each rotor), so that you can (a) find it; and (b) use a finger nail to easily rotate it.