Step 6: Sticking your design
As soon as you print or even draw your dream-design, you can cut it and paste on cardboard.
Easiest way to print it is opening picture in MS Paint, set 1 x 2 pages and set borders 42 mm.
(If your printer can't print without borders, you have to set borders on both sides, so you can set (for example) 15 mm on the left and 27 mm on the right)
This is for A4 paper.
Easiest way to print it is opening picture in MS Paint, set 1 x 2 pages and set borders 42 mm.
(If your printer can't print without borders, you have to set borders on both sides, so you can set (for example) 15 mm on the left and 27 mm on the right)
This is for A4 paper.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
