Makebooth a D.I.Y. for a micbooth

Step 3 Constructing the 2nd wall/door

Basically what we're going to do here is the same as in step 2. Only since this is gonna be the door we're making this one 2m long instead of the 2,45m from step 2. So we need the beams of 2m x 5cm x 2,5 cm (2) and the 1m x 5cm x 2,5cm beams and some screwes to screw it all together. Note that we're only using 4 polystrene blocks.

I'm only using one hardboardplate on the outside of the door so the door is lighter in weight and the Isotop isolating stuff will also be covering it.

Special note: make the door as light as possible, it makes it for the rest of the frame a whole lot easier to support the weight of the door.