With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
For all you little rockers, the time has come to start your gar(b)age band with this Makedo project. No percussionist is complete without a tambourine, shakers and of ...
Source materials from around your home. We’ve used disposable bowls and plates to make the drum shell and ribbon to decorate the rims.
To create the drum shell, use the Makedo Safe-saw and punch a hole on the bottom of both disposable bowls.
Position 1 bowl on top of the other and connect the 2 bowls with a Makedo Re-pin and Re-clip.
To create the drum pattern on the outside, use the Makedo Safe-saw and punch 6 holes on the top and bottom outer rim of the base.
Place a Makedo Re-pin and Re-clip on 4 of the 6 holes punched. These pins will allow us to weave the ribbon around to create the drum pattern. ...
To cap the top and bottom of the drum, position the plates on the top and bottom of the base. Use the Makedo Safe-saw and punch 2 holes ...
Connect the plate to the base with Makedo Re-pins and Re-clips.
To complete your drum, weave the ribbon in a zig zag pattern twisting around each Makedo Re-pin.
Your Makedo drum is now complete. Get creative by using different colours and patterns on your drum. You are now ready to start a beat and start a ...
Join 2 million + to receive instant DIY inspiration in your inbox.
© 2016 Autodesk, Inc.