Instructables
Picture of Makedo Christmas Angel
Create your own Christmas angel to place on top of the Christmas tree using reclaimed materials and Makedo re-pins and re-clips available at mymakedo.com
 
Remove these adsRemove these ads by Signing Up

Step 1: Find

Picture of Find
Source 2 different sized coffee cups and a coffee cup lid, a bottle cap and left over gift wrapping paper.

Step 2: Punch

Picture of Punch
Use the point end of the Makedo safe-saw and punch a hole on the top of the larger coffee cup. Also punch on the side of the samller cup.

Step 3: Connect

Picture of Connect
Connect the smaller cup on its side to the top of the larger coffee cup using a Makedo pin and clip.

Step 4: Punch

Picture of Punch
Punch a hole on the center of the bottle cap using the Makedo safe-saw. Insert a Makedo pin in the hole.

Step 5: Connect

Picture of Connect
Punch a hole on the top of the smaller coffee cup. Position the bottle cap and pin above the cup and Makedo clip it into place.

Step 6: Build

Picture of Build
Pleat fold the gift wrap and layer on top of one another. Punch a hole in the center of the fan fold.

Step 7: Build

Picture of Build
Connect to the main body of the angel with a Makedo pin and clip and using a Makedo hinge on a 90 degree angle.

Step 8: Share

Picture of Share
Decorate if you wish with reclaimed material such as ribbon. Position the remaining coffee cup lid as the face of the angel and place it on the top o your Christmas tree.Share and upload your creation to mymakedo.com
canucksgirl3 years ago
This is cute! Nice idea.
What a darling angel :)