With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Create this beautiful sphere out of plastic cups without the use of sticky tape, only the use of makedo reusable pins and clips.
Materials: Makedo Kit for 30. 163 plastic or paper cups Soldering iron Texta
For this sphere you will need to make two templates, one with 6 holes which is the core template and a 3 hole template that attaches to the 6 hole tem...
To get the points for the 3 hole template, place two cups beside the core template aligned with the dots. Mark the point where the dot is located on o...
To complete the 3 hole template, mark the final dot across from the 2 dots. It should situate in the centre of the 2 dots forming a isosceles triangle...
Use the soldering iron and make holes on the drawn dots large enough to fit a makedo pin through.
Using the two templates just created, use it to mark and make holes on the remaining cups. You will need in total 23 of the 6 hole cups and 138 of the...
Now the fun part! The sphere is made up of 23 units. To create one unit, place 6 3 hole cups surrounding one 6 hole cup.
Align the holes up with the 6 pin cup. Note the placement of the cups in pairs. Using makedo pins, place the pins as shown in the image.
Secure the cups with makedo clips.
You have just completed one unit....22 more to go! Repeat steps 7-12 for the remaining cups.
To connect the units together, simply align the holes of the cup. The cup pairs mentioned earlier should align together with the cup pair of the other...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »