With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Build a cardboard laptop stand that keeps all the cables in place with no tangles. A must for everyone with a laptop. All you need is a box and Makedo...
Source a cardboard box that is wide enough to sit your laptop on.
Begin by placing the box on its side. Use the point end of the Makedo safe-saw and score from one corner of the box to the opposite corner. Cut a hook...
Fold inwards along the creased line. Turn the box over and repeat on the other side.
Fold the top flap to follow the slope of the hook shape. Carefully place your laptop on the angled surface to ensure that it rests firmly without slip...
Use the Makedo safe-saw and punch four holes through the flaps of the cardboard.
Connect using Makedo pins and clips shown in the image.
To create a cable tidy slot, simply attach an extra piece of cardboard to the side of the stand and use the Makedo pin and clip to hold it in to place...
Your Makedo laptop stand is complete. Don’t forget to share and upload your creation to mymakedo.com.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »