Maker Bench

Step 3 Build the Bench Leg Sets

Fit the 2 1 pipe from step 2 into the L10 Single Socket Tee fittings attached to one of the four 3 1-1/2 leg pipes. Fit a 2 1 pipe (with no fittings on it) into L20 Side Outlet Elbows directly above and parallel to the other 2 1 pipe. Tighten set-screws.

Repeat step above with remaining 21 and 31-1/2 pipes.

There should now be two separate sets of two 31-1/2 legs, each attached by one upper and one lower 21 pipe.