Print PDF
Favorite
Email
Step 3Electronics Kit
Many many makers are interested in electronics so i decided to make a small electronic section.
I used an old camera memory card box to keep the electronics separate from the rest of the tools
In the box
1 3v Button cell
1 Red LED
1 Yellow LED
1 Green LED
1 SuperBright Blue LED
5 Resistors
All these components easily fit inside the memory card box and there is plenty of space for more
I used an old camera memory card box to keep the electronics separate from the rest of the tools
In the box
1 3v Button cell
1 Red LED
1 Yellow LED
1 Green LED
1 SuperBright Blue LED
5 Resistors
All these components easily fit inside the memory card box and there is plenty of space for more
| « Previous Step | Download PDFView All Steps | Next Step » |
4
comments
|
Add Comment
|
1
Jun 12, 2010. 11:53 AMh0meIandsecurity
says:
I HAVE THE SAME BATTERY (FROM MY OLD MB) AND SAME BOX (FROM MEMORY CARD )
Reply
3
Aug 11, 2009. 1:52 PMcdousley
says:
a tiny momentary switch and a toggle or slide switch would be useful or extra wire
Reply
3
Aug 11, 2009. 1:53 PMcdousley
says:
o there is wire
Reply
Jul 19, 2009. 1:47 AMpytchblend
says:
What value are those resistors?
Reply
33
Jul 19, 2009. 6:10 AM
=SMART= (author)
says:
=SMART= (author)
says:
I dont know the exact value but they are the right ones for the LED's im carrying
Reply
 |
Add Comment
|
