Introduction: Makers Space Chainmail Braclets

The first thing you should do is get all your supples together and make sure you have everything

-ring loops (you can use any size you prefer

- flat head pliers

- nozzle head pliers

-bracket connectors

Step 1: Adding Links

At first you want to add one link to two links the one to two and repeat till you get the thickness you want. Then you want to start going horizontal and add the 4 to 3 and 4 to 3 until you the desired length

Step 2: Finish

When you are done you wanna just wanna put one link to the last row and the add the connecter to that side and on the other side you wanna keep adding one links so it can fit any any wrist

Comments

author
Swansong (author)2017-06-13

Cute, I had a friend in college that liked to make these :)