Print PDF
Favorite
Email
Step 3Prepare Your Print Surface.
Place one of your B plates that come with the cuttlebug over the green base. Secure it to the base with tape so it won't slide. Any type of tape will do. I used masking tape.
For best results, take at least 2 or 3 pieces of the paper you are going to print on (I used paper source A2 cards) and tape them to the B plate. This provides a cushion and a deeper impression.
For best results, take at least 2 or 3 pieces of the paper you are going to print on (I used paper source A2 cards) and tape them to the B plate. This provides a cushion and a deeper impression.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
