Print PDF
Favorite
Email
Step 4Shine On!
Plug in, flip your switch, and, if you've included lightbulbs and haven't miswired anything, you should be in well-lit, outlet-filled bliss.
Some improvements you might consider are:
-Adding a nonconductive, watertight sealant around the edges of the outlets.
-Providing separation between exposed, AC-carrying wires and whatever you put in the toolbox. this could be bending the wires to the side and placing an inner layer of plastic between wires and toolbox contents.
-Adding a DC converter and having one side of this output adjustable DC current/voltage for projects.
-Adding a camera, duct tape dispenser, or whatever else you never have handy but always wnat for your projects.
-Basically, anything you feel like adding on!
And, as Pink Floyd would say:
Shine on, you crazy diamond:)
Some improvements you might consider are:
-Adding a nonconductive, watertight sealant around the edges of the outlets.
-Providing separation between exposed, AC-carrying wires and whatever you put in the toolbox. this could be bending the wires to the side and placing an inner layer of plastic between wires and toolbox contents.
-Adding a DC converter and having one side of this output adjustable DC current/voltage for projects.
-Adding a camera, duct tape dispenser, or whatever else you never have handy but always wnat for your projects.
-Basically, anything you feel like adding on!
And, as Pink Floyd would say:
Shine on, you crazy diamond:)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
