Instructables
Picture of Making A Cone
IMG_9904.JPG
We actually have had 100's of people ask us how to make a cone. Granted most of them were in grade school but it led us to believe there must be an instructable on this.

Cones can be used for many things. Such as traffic cones, snow cones, cones of a rocket, decorations, hats, etc.

Check us out at Cat's Science Club.

Like us on Facebook

Step 1: Circle

Picture of Circle
Make any size circle. Easiest to trace something round ;-)

Step 2: Cut

Picture of Cut
Cut out the circle.

Step 3: Triangle?

Picture of Triangle?
Using a straightedge, make a triangle in your circle. Connect the center of the circle with the edges. Think PacMan.

Step 4: Cut Again

Picture of Cut Again
IMG_9897.JPG
Cut out the triangle ou. Imagine "PacMan" or a pizza with a piece missing.

Step 5: Overlap

Picture of Overlap
IMG_9902.JPG
IMG_9904.JPG
Bring the ends of the "PacMan" together to form a cone.  You will have to overlap the sides to get the size cone you want.

Step 6: Tape

Picture of Tape
IMG_9907.JPG
Tape the edge to keep the cone from unraveling.

Step 7: Paint And Have Fun

Picture of Paint And Have Fun
IMG_0171.JPG
Painting optional ;-)

Have fun playing with your new cones!
 
Remove these adsRemove these ads by Signing Up