Winter's coming up (if you're in the Northern Hemisphere) and with winter comes cold weather, and with cold weather comes gloves. But even in the cold your phone probably still rings. And while I love my touch screen phone, I hate that I can't use it with gloves on.
There are gloves out there that allow you do use your touch screen, but why buy special gloves when, with just a few stitches you can convert the gloves you already have?
Update: Here's a video that runs you through the steps:
Step 1: What You Need
You need to be able to sew a few stitches without killing yourself.
You will need:
- A glove.
- A needle.
- 12" (30cm) of conductive thread. (TIP: If you don't want to buy a whole spool, you can buy a few feet much more affordably from SparkFun, Adafruit, or Sternalb.
Unfortunately there are people on Etsy and eBay selling sparkly thread as "conductive thread". It's not and will not work with this project. I've purchased from the sellers linked above and can vouch that it's the real stuff. If you buy it elsewhere be sure that the seller lists conductivity data (ohms per foot or similar). Also conductive thread is not super sparkly, it has a color and finish more like brushed stainless steel.
What's conductive thread? This great article over at Fashioning Technology will tell you everything you need to know and where to get some. And when you get some, you'll find there are tons of interesting things you can do with it. Just look!
(Thanks to the good people at reMake Lounge for introducing me to conductive thread at the last Instructables Build Night)
That's it, lets get to it!