I will be adding more steps over time.
Step 1: Downloading And Entering the Program
Click on the link Knex.zip. Save the file.
2: Once you have downloaded MlCad, find the folder labelled Knex. If it is not already on your desktop, run a search of your computer for a folder titled Knex.
3: Enter the Knex folder and double click on the application titled MLCAD.
4: Mlcad is now opened.
Step 2: Building A Y-Connector
2: To start, go to P in the parts bin.
3: Pull out one Panel 1 x 2 x 1.
4: Copy and paste the panel. Flip it so that it mirrors the other one.
5: Go to T in the parts bin.
6: Pull out one Technic Pin Joiner Round.
7: Add a connector.
8: Use the connector to adjust the distance of the two panels from each other.
9: Delete the connector.
10: Select all 3 parts.
11: Group the parts, and call them Y-Connector.
Step 3: Increasing Rotation Angle
2: Check the box next to Use rotation vector values. Type 1 for Z, type 45 for Angle. Hit OK.
3: You should now be able to rotate parts by 45 degree increments in medium grid mode.