Step 3: Paint

Depending on your style, you can paint the gourds however you like or finish them with a clear sealant.  The protective coating of paint or sealant will help your birdhouse last through the seasons.  Hanging the gourds from the eye hooks while painting provides a convenient way to reach the entire surface.
<p>I made this using a few different techniques and entering it in the remix 2.0 contest. I incorporated the overhang suggested by Zacker and took precautions to avoid the dust suggested by Kozz. </p>
I use a wire wheel on a drill to get all the nasty outer layer off the outside, i then drill the hole for the entrance and use a long thin screwdriver to scrape out the insides..i get out as much as possible. then i drill a smaller hole and glue a twig in it for a perch and drill a hole through the top near the stem to put wire through for a loop to hang it. on the last one i did, i put a small Roof overhang above the entrance hole and now its got chickadees in it...lol
I have a couple gourds, but they are not dry. How do you dry them? I wonder if I could accomplish that by putting them in the oven at a low temperature, so that I don't have to wait a couple of years while they dry out.
Gourd job!
The only thing I would add, is a short section of dowel just below the opening. I've done this before, and without some sort of &quot;landing platform&quot; the Red-Wasps tend to occupy the gourds before the birds. Shoot wasp spray at the gourd and watch the thing spin! :/
The best test is: Do the birds like them?
Sanding isn't really necessary. Basically all you need to do is give the gourd a good spray with 409 or any good spray cleaner, let them sit a few minutes, then use a stainless steel scrubber. The mold and dirt come right off and leave gorgeous patterns and a lovely smooth surface - it'd be a shame to sand those patterns off! Also if they're going to be used outside, don't use varnish - use something like Thompson's Water Seal to keep the gourds waterproof. Great instructable! :)
Great idea. I think I may try sanding and varnishing to keep the natural color.
really nice.. lovin it
Simple and beuaty! I Like it.
I drill 3 or 4, 1/4&quot; holes in the bottom of the gourd. This allows any rain that is blown in through the entrance hole to drain out, so the nest won't flood and reduce the risk of mold which would be bad for the birds. <br><br>Dr Pepper,<br><br>Yes they do work the House Wrens love them. the Wrens are excellent bug hunters. But they are territorial so place the houses at-least 50 feet apart, or else the male will over fill all houses but the one he is going to use with in his territory.
Wow, this is great!
This is awesome! We have some birdhouse gourds from our garden, and we're going to make these soon! Right now they're still drying out but they should be finished soon :D
Oh i love this!
Those are gorgeous! Do they work well?
Those look pretty nice. And then all you need is differently-sized Forstner bits to accommodate different bird species.<br> <br> One thing to note is that you probably ought to wear a respirator. Folks who work with gourds a LOT can develop sickness due to the dust. <a href="http://www.thegourdreserve.com/gourd_safety.html">http://www.thegourdreserve.com/gourd_safety.html</a>

About This Instructable


110 favorites


More by calischs: Repair Stripped Screw Holes Tie-Dye Whities Designer Vases from Styrofoam Cups
Add instructable to: