Making Gradient Design in Tinkercad

647

7

Posted

Introduction: Making Gradient Design in Tinkercad

This is how to make your tinkercad design gradient.

Step 1: Pick Object

I chose my star twisting flowerpot.

Step 2: Make Your Gradient

I made a gradient cylinder witch was very tough so I am not going to get into it here is a link if someone needs it

first version (used in this instructable)

second version

you could also use a normal gradient what is usually a cube that fades

I would go to look at elok's designs first but here is a cube if you need it

then I duplicated it moved it up and twisted it (this step is optional only use with cylinder)

you may or may not need to scale up depending on design

Step 3: Make Large Cube

Make a cube large enough to fit gradient in it.

Step 4: Align and Group

  • Turn star pot into hole
  • align with cube
  • group
  • turn cube into hole
  • align with gradient
  • group

Step 5: Finished

That is everything if you want to have it printed you should be able to get it in full color depending on design.

If this helped you please vote for me in plastics and gif contest

Share

    Recommendations

    • Science of Cooking

      Science of Cooking
    • Pocket-Sized Contest

      Pocket-Sized Contest
    • Spotless Contest

      Spotless Contest
    user

    We have a be nice policy.
    Please be positive and constructive.

    Tips

    Questions

    Comments