Print PDF
Favorite
Email
Step 5Show Off
Now, Show off your new, inexpensive, decent quality, rocket tooling.
Wel, not really. If you can find someone that actually cares, then okay, but otherwise...
Anyway, I might note that these are end burning, requiring a faster propellant.Of course you could drill the cores, but that is asking to get hurt/burned.You do have to drill the nozzles, but if you don't go too far, it is safe.Relitively. Also, You might be able to make whistle rockets with this, but I don't know much about them, so...
Another thing to note is that the rammer tips will "mushroom" (slightly) when hit too hard with a steel hammer, so try to use softer blows, and/or a rubber mallet.I think that for the end price,(even without a mandrel and base) it is a good deal.
Wel, not really. If you can find someone that actually cares, then okay, but otherwise...
Anyway, I might note that these are end burning, requiring a faster propellant.Of course you could drill the cores, but that is asking to get hurt/burned.You do have to drill the nozzles, but if you don't go too far, it is safe.Relitively. Also, You might be able to make whistle rockets with this, but I don't know much about them, so...
Another thing to note is that the rammer tips will "mushroom" (slightly) when hit too hard with a steel hammer, so try to use softer blows, and/or a rubber mallet.I think that for the end price,(even without a mandrel and base) it is a good deal.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
