Print PDF
Favorite
Email
Step 3Preparing the LEDs
In order to make the 3 LED in a perfect circle, I used a pen and taped them up together in a circle.
Make sure you have the long and short leads all in the same direction.
Solder the first long lead to the next short lead, and so on. Leaving you at the end with one long and one short lead not soldered. These two leads will be the negative and positive of the LEDs series.
Make sure you have the long and short leads all in the same direction.
Solder the first long lead to the next short lead, and so on. Leaving you at the end with one long and one short lead not soldered. These two leads will be the negative and positive of the LEDs series.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
