Print PDF
Favorite
Email
Step 8Add the Head Shrink and glue
Add the heat shrink tube over the circuit,
leave a bit other the metal socket and shrink it a bit so it make a seal. DO not shrink the hole tube.
Only over the socket.
Fill the tube with hot glue. let it cool down in a refrigerator for 15 minutes. This will make sure the glue is cold. This will give you a chance to heat the shrink tube at the and without melting the glue too much.
leave a bit other the metal socket and shrink it a bit so it make a seal. DO not shrink the hole tube.
Only over the socket.
Fill the tube with hot glue. let it cool down in a refrigerator for 15 minutes. This will make sure the glue is cold. This will give you a chance to heat the shrink tube at the and without melting the glue too much.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
