Introduction: Making a Magnet Note Holder Airplane

I made this Airplane to support the Makers care ( Make a Wish Foundation )

Every one could make a plane to help them they. And for every Airplane we made they give a donation.

And this was my idea.....

You can use the Airplane clip as messege note holder.....

But also to keep your chips bag close.

Just a small fun project for every one.

Step 1: What You Need.....

1. A picture of a airplane....Or use mine.

2. Thin plywood

3. Scrollsaw

4. Glue

5. Smole magnets

6. Clothpins

7. Drillbit

8. Paint

Step 2: Let's Get Started

Picture of Let's Get Started

Cut out your Airplane and glue it on to the plywood.

Cut it out with a scrollsaw

Take of the paper and finish it with sandpaper to get it smooth.

Draw the lines on the plane with a pencil

Paint the plane in the coulers you want.

Draw some lines with a thin sharpie to see the contour better.

Step 3: Lets Finish the Plane

Picture of Lets Finish the Plane

Drill a hole in the clothpin.

Put the magnet in.

Glue the clothpin on to the back of the airplane

And you magnet note holder is done...


DIY Hacks and How Tos (author)2015-10-31

Great looking refrigerator magnet!


About This Instructable




Bio: http://
More by hboom:Stir Fried Seaweed Carved Garlic HolderChristmas Stamps
Add instructable to: