Instructables

Making a Paracord Whip

Contest Winner

Step 25: Globe knot end (stockwhip)

Picture of Globe knot end (stockwhip)
82.jpg
83.jpg
84.jpg
85.jpg
If you have the globe knot cookbook and want to do a globe knot end (easier for a stockwhip) follow these steps.
Every stockwhip needs a knob. I use 2-part sculptable epoxy. It's a bit like sculpting bubblegum, but it has a working life of about 5-15 minutes and cures hard in an hour.
I make the knob as even as I can, about an inch across.
Then I tie a "globe-on-a-post" to it. 56ZQB works well. I used about 12 feet of paracord for the globe knot here, and left room to do an interweave with a 3rd strand.
I also tied a Spanish ring knot. Since 56ZQB would be very difficult to tie without a globe knot tool, and those are included with the globe knot cookbook set I'll not provide instructions on how to tie it unless Don Burrhus says I can, since I'd just be copying his book. Spanish ring knots are very common, instructions are easy to find.
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!