Making a Small Knitting Loom

Step 4 Make it circular!

Okay, I apologize for not having a decent picture of how I did this. But it's really not that difficult. Just keep evenly bending each zig-zag in a little bit until it forms a circle. You can probably see by the pic, I also cut off some of the excess wire. When you get it all bent the way you like, cut the excess to line up with the bottom bends.

I first tried taping the two end pieces with some electrical tape, but when I started working with it the tape just got warm and wanted to slide off. It got sticky and gross, so I wouldn't recommend it.

Also, if you look at the last picture, it allows for cords to be shoved through without having to force open the loom you created.