Introduction: Making a Speaker (EASY)

Hello.

This is very easy and creature.

Step 1: What You Need

1- Pen
2- Pet cup
3- Headset
4- Computer with Windows OS
5- Internet connection

Step 2: Firstly

get ready

Step 3: In Windows OS Steps

1- Download the SRS Audio Sandbox program HERE.
2- Install the program.
3- Open the program and click Try Now or Buy Now. If you click Buy Now you must buy.
4- Set the settings like photo.

Step 4: The End

The end :D Open a music and enjoy :D

Here speaker test video: Youtube - TEST

I'm sorry for my English. My English is bad because I'm Turkish :D

Thanks for viewed.

Comments

author
Istarian (author)2015-06-26

For what it's worth, what you're making is more like a passive amplifier that directs the sound than a speaker. The headphone is a speaker by itself. You'll also probably get better results with a paper cup than plastic.

In fact if you cut the bottom out of a paper cup, and took the headphone apart and attached the actual speaker/driver (the bit that creates the sound directly) to a circular piece of fairly thin plastic and then fitted that to the bottom of the paper cup it would probably work even better. Of course that would irreparably damage the nice complete set of headphones, but whatever...

author
omerakz (author)Istarian2015-06-26

Maybe, but i made it 1 years ago and I was new on instructables. Thanks for comment.

author
omerakz (author)2014-01-14

thanks for comments. i'm new here and my eng is bad. you should understimade me. swaggerer :S

author
efahrenholz (author)2014-01-12

not really a sound horn, more of a wave guide.

author
lime3D (author)2014-01-12

you are not making a speaker. the headphones are already speakers. you are making a sound horn.

About This Instructable

1,251views

11favorites

More by omerakz:Making a Speaker (EASY)
Add instructable to: