Introduction: Making an Arduino Powered Curtain Automation


In this video I start work on showing you how to make an Arduino Powered device that will open and close curtains!

By using some rope and a continuous rotation servo I am able to create a pulley system that will serve as the backbones to the movement system.

This is the first part where I 3D print the pulleys and the main control box and test the mechanical systems.

In the next episode we will wire everything up and program it!

Comments

author
nayana satpute (author)2016-08-30

I would to know details about all accessories required for the project

author
riaz.sulaimi (author)2016-06-10

Will u be uploading yoir 3d stl files? Thanks!

author
SapK (author)2015-04-24

WOuld like to know the parts list used for this project.

author
cartiman (author)2014-06-10

thanks you. It's very usefull

About This Instructable

10,616views

89favorites

License:

Bio: Robot fanatic.YouTuber. Robotics teacher.
More by chickenparmi:Making an Arduino Powered Curtain AutomationArduino Powered Jack-O'-lanternToilet Paper Roll Spooky Eyes
Add instructable to: