With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Step by step guide for modding the case of an IP camera so that it can be attached directly to a Fish Tank. The reason this is needed is because webc...
1. Get an IP webcam (this means that you dont have to have a PC attached to it to get the images onto the web. The one i chose was an Orite IP cam 200...
1. Unscrew the two small phillips screws on the underside of the box 2. Pull the box apart 3. Unscrew the final philips screw which attaches the PCB t...
1. Carfully cut a hole in the project box that will take the cable - make sure that it fits nicely and the box closes fully 2. Cut a hole in the front...
Fairly self explanitory! I have used two large lumps of bluetack to hold the camera in place, this allowed me to adjust its angle inside the case eas...
This took a while, first of all get the focus correct then keep playing with the angle of the camera until you can see enough of the tank. Once done ...
I used lots of bluetack!
Now just port forward your DSL IP address on port 80 to the webcam.There are lots of other bits to do on this, including the firewall setup, the camer...
Ive found, bought an installed a wideagle lens, i bought this from http://www.maplin.co.uk (Stock code MW64U) for about £13.Please take another look a...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »