Making wooden sandals (Scholl's style)


Step 3: Rough cut out

Picture of Rough cut out
There is a registration problem between the routing and the outline, so for the second pair I made I decided to do a rough cutout first, then machine the surface of the sandal, then do a final cut around the outline. Here I am about to cut the two rough outlines from the blank. Note that one of the blanks is inverted (the upper side of the two sandals are on opposite sides of the wood blank).
Remove these adsRemove these ads by Signing Up

Get More Out of Instructables

Already have an Account?


PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!