Mario Goomba Shoe Stocking

Step 3 Cut out felt pieces

Cut out the following pieces:

• Back piece in black from the large, un-cut pattern. This is the back of the stocking. Leave a bit of seam allowance around the edge of it so you can trim it all away nicely later.
• Entire shoe from black felt (to glue the green pieces onto). Also leave some seam allowance around the side of this piece
• Shoe details from green - the cuff and the main body of the shoe part) - Cut on the edge, leaving no seam allowance (referred to as "nsa" from here on out)
• Key from white (nsa)
• Face from pink (nsa)
• Hat from red (nsa)