I always loved video games and woodworking.
Since I bought a scroll saw I started cutting projects based on video games.
This is one of them - Mario Mushroom Wooden Coasters.

Step 1: Needed Tools and Materials

What you will need:

Tools:
1. Scroll saw
2. Drill

Materials:
3. Wood (in my case it was plywood)
4. Wood glue
5. Glue stick
6. Felt
7. Printed pattern (download it here: Mario Mushroom Pattern)
8. Varnish
9. Masking tape
10. Sandpaper

Optional:
1. Wood stain

Step 2: Preparations

When I scroll cut a project I try to stack minimum two wood pieces at the same time - thanks to stack cutting I get two identical cuts in only one cut. We just need to take two pieces of wood, place one on another and wrap them with masking tape.

Step 3: Glue the Pattern

Spread stick glue on the upper side of the stack and place pattern on it.

Step 4: Drilling Holes

Wait till glue dries up and drill holes for the scroll saw blades.

Step 5: Cutiing

Cut the pattern.

Step 6: Masking Off

Rip the masking tape off.

Step 7: Sanding

Sand burrs on the underside and top of the coaster.

Step 8: Wood Stain

Depending of type of used wood we can apply wood stain.

Step 9: Varnish

When the wood stain dries out apply 2-3 coats of varnish. Off course wait till each coat of varnish dries out before applying the next one. Before applying every coat of varnish gently sand the coaster with fine-grained sandpaper.