Print PDF
Favorite
Email
Step 3Cutting
Cut the shapes according to the pattern traced on the materials.
Additionally, trance the INSIDE shape on foam and cut it out. Then trace the button stencil onto the foam to mark where to make the holes. Using a hole maker, evenly distribute about 3, 4 or 5 holes per button, depending on its size.
Using the same button stencil, trance the button shapes onto the iron-on sheet and number them. Iron the iron-on sheet to the conductive fabric. Now you can cut out the 38 buttons from the conductive fabric and keep them in a safe place.
Additionally, trance the INSIDE shape on foam and cut it out. Then trace the button stencil onto the foam to mark where to make the holes. Using a hole maker, evenly distribute about 3, 4 or 5 holes per button, depending on its size.
Using the same button stencil, trance the button shapes onto the iron-on sheet and number them. Iron the iron-on sheet to the conductive fabric. Now you can cut out the 38 buttons from the conductive fabric and keep them in a safe place.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
