Print PDF
Favorite
Email
Step 2Electronics Assembly
It is good to put the MCU and the microphone amplifier on two separate boards. This makes it easier to cramp them into the round Android body next to the servo. It is possible to add a 6 pin programming header to the MCU board. But again, for space reasons it is better to just make a separate programming adapter board with just the header and a socket.
Try to keep everything as small as possible. Solder the resistors directly to the LEDs. There is more space inside the Android.
Try to keep everything as small as possible. Solder the resistors directly to the LEDs. There is more space inside the Android.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
