Mega Man Costume

Step 11 Mega Man's Mega Buster (Finishing)

Tools:
Hot Glue Gun
Materials:
Glue Sticks

This was a long and complicated step. It was basically like trying to solve one of those mechanical puzzles. I had to figure out how to get everything together, while being able to glue each step along the way.

First I glued the power meter cover in place. Then the power meter. Then the fabric covered gun tip to the end of the body. Then glued the the bowl holding the led to the inside of the gun tip. Then the cover over top of the LED. Finally I glued the forearm bowl to the other side of the gun, then glued the rest of the body's fabric to the forearm bowl.

I made one mistake which isn't too noticeable on the inside of the power meter. Over all I am happy with the outcome, and here are some pictures.

Comments

[manderson76]

Could you tell me where the power meter cover was made in the instructions, i cant for the life of me find it. How did you construct it to portray different individual squares?

[craineum]

Sorry its not clear. All I did was to have a roughed up piece of plastic that covered the channel of LED's. I then used a sharpie to draw the black lines between the lights on that plastic cover to make it look like individual squares. Does that make sense?