Print PDF
Favorite
Email
Step 14Mega Man's Boots (Form Foam)
Tools:
Fine Point Marker
Scissors
Hot Glue Gun
Materials:
Foam
Hot Glue Sticks
This was easy... just copy my template onto the foam then cut.
I had originally planned to have the boots be able to velcro together, but then they would not have looked as clean. Since these boots were just going to slide up his leg before putting on the shoes I could glue everything together first. I tested hot gluing this foam. It definitely melted, but not too bad, so I decided to use it.
Fine Point Marker
Scissors
Hot Glue Gun
Materials:
Foam
Hot Glue Sticks
This was easy... just copy my template onto the foam then cut.
I had originally planned to have the boots be able to velcro together, but then they would not have looked as clean. Since these boots were just going to slide up his leg before putting on the shoes I could glue everything together first. I tested hot gluing this foam. It definitely melted, but not too bad, so I decided to use it.
| « Previous Step | Download PDFView All Steps | Next Step » |
2
comments
|
Add Comment
|
Oct 17, 2010. 7:37 PMmcc10828
says:
What is on the inside of the foam?
Reply
12
Oct 18, 2010. 4:01 AM
craineum (author)
says:
craineum (author)
says:
Just the shoe, which I glued velcro to the shoe and the foam to keep it in place, plus the strap that went under the shoe. This wasn't the best design. I am making something similar this year, and am probably going to use some kind of foam under underneath these forms. I will get back with you on this :).
Reply
 |
Add Comment
|
