Introduction: Melting Flesh

Picture of Melting Flesh

MAKING SOMETHING TO LOOK AS THOUGH IT'S FLESH WAS MELTING OFF IS REALLY QUIT SIMPLE


FIRST I FOUND A BASIC PLASTIC HAND AT THE DOLLAR STORE, THEN I GOT OUT MY FAVORITE MATERIALS- ELMER'S SCHOOL GLUE, TOILET PAPER (ONE PLY), PAINT BRUSHES, FAKE BLOOD AND CORNSTARCH. HAVE SOME SCISSORS AND A SPONGE BRUSH HANDY ALSO. FIRST COVER THE HAND WITH THE ELMER'S SCHOOL GLUE THEN PUT THE TP ON IT TO COVER GLUE USE SPONGE TO PAT IT DOWN. ADD TP UNTILL HAND IS COVERED, THEN MIX TOGETHER FAKE BLOOD AND CORNSTARCH TO THICKEN BLOOD ( 2 oz portion cup 2/3 full of fake blood to about 1/4 tsp cornstarch) TEAR UP SOME TP INTO QUARTER SIZE SHREDS, USE FAKE BLOOD TO DAB ON THE HAND STICK TP TO BRUSH AND STICK TO BLOOD ON THE HAND, KEEP IT WET; BRUSH BLOOD AND FOLD OR PUSH TP TO STICK AND GET THE TEXTURE DESIRED ADD MORE TP FOR DEEPER WOUNDS SLIDE BRUSH ALONG BASE TO PUSH INTO WOUND,AND USING BRUSH PUSH TP INTO PILE THEN PUSH IN AND OUT OF THE MIDDLE KEEPING THE BRUSH DRIPPING WITH BLOOD KEEP GOING TILL ALL "SORES" ARE CREATED. ADD SOME RUNNY BLOOD AND LET IT DRIP JUST REMEMBER NOTHING IS PERFECT AND IF YOU DO NOT LIKE HOW IT TURNED OUT PEEL IT OFF, WASH, DRY AND REPEAT TILL YOU GET EXACTLY WHAT YOU WANT! ENJOY

Comments

seamster (author)2015-09-29

This is a pretty neat looking effect!

Just a tip, using all CAPS makes this very hard to read :)

skidz01 (author)seamster2015-09-29

okay thank you for your comment :)

About This Instructable

139views

3favorites

License:

More by skidz01:Melting FleshMELTING FLESH
Add instructable to: