Print PDF
Favorite
Email
Step 9Add the Speaker
Step 9 - Speaker:
Cut 2 pieces of wire about 2 inches long, strip both ends and solder one end of each wire to each terminal of the speaker. Solder the two wires to P19 and Q19 on the top side of the PCB.
Bend the wires to place the speaker in the place were you want it.
Cut 2 pieces of wire about 2 inches long, strip both ends and solder one end of each wire to each terminal of the speaker. Solder the two wires to P19 and Q19 on the top side of the PCB.
Bend the wires to place the speaker in the place were you want it.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
