With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Glowstick Twisters are two metal pieces of tubing that holdtwo Glowstick's, connected by a piece of nylon cord. The Twisters are then manipulated arou...
You will need: Hollow Metal Tubing 44cm x 19mm A piece of nylon string if possible, if not a good quality string 45 cm long Coloured Duc...
Cut the metal tubing in half to 22cm each. Wrap in single layer of chosen colour of tape,
Make two 12 mm holes 3 cm from end in one end of each piece of tubing.
Cut the cord to about 21cm Feed the cord in the end of the tube out one of the holes around the tube then through the other hole then out...
Tie the ends of the cord using a reef knot. left over right then right over left. Adjust the length of cord so the two tubes are around 1...
Secure the ends of the cord by wrapping cotton around then tie the off the cotton.
Push the wide end of the glow stick into the end of the holder and wrap some clear tape around the light and holder, six times will do.
Search nunchaku tricks on youtube.com for tricks and tips.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »