Introduction: Metal Lightsaber Replica
this is how to make a lightsaber replica prop.
Step 1: What You Will Need
1: 6 inch threaded pipe
2: 3/4 metal cap
3: 3/4 metal plug
4: 20 O-Rings
Step 2: The O-Rings
Ok so you have your 6 inch threaded pipe so what your gonna do is slide your O-Rings on to the pipe as shown in the picture.
Step 3: The Finish Product
So you just have to screw in the pieces and your done.
We have a be nice policy.
Please be positive and constructive.