Print PDF
Favorite
Email
Step 3Assembly
This part is easy...insert the bolt up through the inside of the cap and snug the nut up nice and tight.
Then, put the wingnut on. In this case, though, we want to put the wings on the cap-side so we have a nice flat surface to tighten up against the camera later.
Now it's time to turn our attention to the PVC adapter.
Then, put the wingnut on. In this case, though, we want to put the wings on the cap-side so we have a nice flat surface to tighten up against the camera later.
Now it's time to turn our attention to the PVC adapter.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
