Introduction: Micro Origami

Follow these simple steps to become a master in creating micro origami .

Step 1: Paper

Take any piece of paper and cut a piece that is 2.3cm in length and 1.7cm wide. This small piece of paper is what you will be using to make your micro origami. If you want to make something that requires a square piece of paper to start with then cut on that is 2.5 cm long and 2.5cm wide.

Step 2: Folding

For this instructable we will fold this piece of paper into a paper aeroplane. You can act as if this is a normal A4 piece of paper because you will be using the same steps as if it were a normal size paper.

Step 3: Folding 2

Fold the paper in half as shown in the picture

Step 4: Folding 3

Take the top right and top left corner. Make a fold so that they reach the top middle of the paper to create an arrow shape as shown in the picture.

Step 5: Folding 4

Make another fold which gives a pointy arrow at the top as seen in the photo

Step 6: Folding 5

Fold the plane in half

Step 7: Folding 6

Once folded in half you have to make another fold to make the wing and repeat this as shown in the picture.

Step 8: Final Step

You have created your micro plane. You can use the first step of cutting the paper to make all types of simple origami like this.

Comments

author
farisaziz12 made it! (author)2016-04-05

Thank you

author
seamster made it! (author)2016-04-05

These are so impressive!