Can I just say to people that this gun is not meant to fire far or hurt - it is just a very lightweight and small stealth gun.
Step 1: Parts
1 rubber band
1 yellow connector
2 white connectors
3 orange connectors(mine are dark brown)
1 grey connector
3 grey rods
2 yellow rods(mine are dark grey)
1 blue rod
Any form of projectile(I have 3 green and 1 black little rods)
Step 5: Assembly
Place the trigger on the left sticking out bit if you are firing from your left hand or on the right if you are using your right hand.
Then slide the white piece up the frame to hold the trigger in.
Step 6: Last step
Stretch the elastic band from one brown connector to the firing pin then to the other one.
Step 7: Loading and firing
Pull the pin back and the trigger will fall in to place.
Put a green rod into the hole at the front of the gun.
Rest the two yellow rods in the palm of your hand,lift the trigger with your tumb and the firing pin will hit the greenrod firing it silently out the end of the gun.