With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Leaving a Micrometer loose inside a drawer is like asking for trouble. Other tools could slide/roll over and bump into the mic causing a loss in precision (a ...
To successfully complete this case you will need the following tools:*Plunge Router*Router Bits, at least a 1/4 inch flute cutter*Saw*Ruler*Pencil*Scribe*Combination square or similar*Assortment of drills*Power drillYou will also ...
Place the bottom on a work bench or large board you will not be afraid to drive nails or screws into. Using some scrap wood clamp around the ...
Choose a router bit that will accommodate the tools diameter/dimensions. Depending on the type of bit you may need to use a foster bit of the same size ...
Find and cut a piece for the top. Try to make it from the same type of wood so that it will match nicely. I had some leftover ...
I picked up a set of hinges and some fancy clasps from the hard ware store. I got 1" by 1 brass hinges and small brass clasps, i ...
That's it. You should now have a nice case for your tool.Using my engraving machine I placed the name and the measurement range on top so that I ...
The 'correct' way to measure a cylinder bore and measure cylinder using piston diamet...by crazypj
The Utlimate Mini Mobile Metalshopby dorkpunch
Micrometer cleaning and lubricationby tundrawolf
Interfacing a Digital Micrometer to a Arduino & VGA Monitorby sspence
DIY Caliper & Drafting Equipment Protection Case by rhenderson33
Join 2 million + to receive instant inspiration in your inbox.
Download our apps!
© 2015 Autodesk, Inc.
Enter the email associated with your account and we will send you your username and a temporary password.
Not a member? Sign Up »
Already a member? Login »
That's a pro feature!
Want to go pro?
First step is to sign up.
By clicking "Sign me up!" you are indicating that you have read and agree to the Terms of service.
Already a member?" Login »