Print PDF
Favorite
Email
Step 2Construction and Operation
Items shown in the picture below, by number:
1. single acting spring return cylinder
2. double acting cylinder
3. lever switch
4. string
5. r/c control horn
Operation:
1. Activate cylinder #1 to pull PEZ head back
2. Control horn depresses switch lever to indicate the weapon is in firing position
3. Activate LED
4. Cycle cylinder #2 to eject one round of ammo...or rectangle...whatever...
5. Turn off LED, release cylinder #1
TV remote causes the output pin of the IR detector to go high. This triggers the BASIC STAMP as indicated in the source code shown in the next step.
1. single acting spring return cylinder
2. double acting cylinder
3. lever switch
4. string
5. r/c control horn
Operation:
1. Activate cylinder #1 to pull PEZ head back
2. Control horn depresses switch lever to indicate the weapon is in firing position
3. Activate LED
4. Cycle cylinder #2 to eject one round of ammo...or rectangle...whatever...
5. Turn off LED, release cylinder #1
TV remote causes the output pin of the IR detector to go high. This triggers the BASIC STAMP as indicated in the source code shown in the next step.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
![PEZ USB 2.0 [C-3PO]](http://img.instructables.com/files/deriv/FAN/W2G7/WLTEXCFMDKD/FANW2G7WLTEXCFMDKD.SQUARE.jpg)
