Hope you liked this instructable. It took me a while but all whovians will love it. Show your friends and laugh when they say " It's bigger on the ins...
Hello this is my first so don't judge me.
I am an avid whovian and am always finding ways to combine my favorite things. Via. Minecraft and Doctor Who. In this Instructables I will show you how to make a tardis that is really bigger on the inside. Please enjoy
First make a new world in creative, it can be super flat or normal. I'm going to make it flat for clarity.
Step 2: Bare Bones
First thing You need to do is to give yourself a command block. (137)
You will also need these for the exterior:
-red stone torch/lamp
-command block said above
-stone pressure plate
Step 3: 1st Layer
Cut a 9x9 square in the ground. Lay out one edge block with the command block and all the others blue wool. Don't touch the command block yet!
Step 4: 2nd Layer
Line the sides with blue wool and a pressure plate in the very middle.
Step 5: 3rd And 4th Layer
Layout all around the sides but leave the hole for door In blue wool.
Layout all sides in blue wool but leave the middle out. Inside the middle leave a red stone torch.
Step 6: Last Layer
Put a layer of stone slabs on the sides and the lamp in the middle.
On the outsides put the signs. You can put writing on the signs but I didn't.
Step 7: Coordinates
Now for the command block. Press F3 and find the coordinate part ( x y z )
Go to the inside part of your tardis exterior and
Write Down the coordinates. Mine are 8.3 237 12.43 they have to be exact.
Now find where your interior will be. Place a command block at the interior entrance/exit. Find the coordinates for the interior and write them down. Mine are -111.5 239 123.72
Step 8: Input Coordinates
Type in /tp @p then your coordinates on the opposite command block that you got them, if that makes sense. :)
Fill in block in exterior.