Introduction: Mini Lego AK-47
This will show how to make a mini model of an AK-47 machine gun out of legos.
Step 1: The Pieces
Here are the pieces needed.
Step 2: The Ammo Clip
Attach the black side coupling brick to the 1x2 plate as shown.
Step 3:
Add the curve brick next to that.
Step 4:
Stick the vent brick on top.
Step 5: The Barrel
Attach a clamp to the brown square.
Step 6:
Put a black square on the clamp.
Step 7:
Put the two cylinders on the square.
Step 8:
Put the small rod in the hole in the top cylinder.
Step 9:
Attach the finished part to the ammo clip.
Step 10: The Stock
Put the brown side coupling brick on the slope piece.
Step 11:
Put the black stud on that.
Step 12:
Put a clamp on that.
Step 13:
Clip the pistol into the clamp.
Step 14:
Put a clamp facing away from the last one.
Step 15:
Put the finished stock on the back of the ammo clip.
Step 16: The Scope
Put the antenna through the top of the cone as shown.
Step 17: Done!
Clip the scope to the gun as shown.
And your done!
Participated in the
Pocket-Sized Contest