Instructables

Step 5: Main Blaster Cannon

Picture of Main Blaster Cannon
21.jpg
22.jpg
23.jpg
24.jpg
25.jpg
26.jpg
27.jpg
28.jpg
The main blaster cannons were the tiniest parts in the build and required a very delicate sanding 'touch'.  A toothpick was initially sanded to a small cylinder-shape to represent the barrels and tapered towards both ends.

Spares were used for the gun mounts and a piece of barbecue stick for the blaster counter weight.
 
Remove these adsRemove these ads by Signing Up
I also use the chuck in my Dremel or a Screw Gun to use to turn small wooden, brass, aluminum and Acrylic parts for projects that I do. Comes in really handy to do it that way. I like you method as well. There is nothing like hand made. You Walkers are spot on! Good job!