Instructables

Mini AT-ST Popsicle Stick Model

FeaturedContest Winner

Step 7: Put it all together....

Picture of Put it all together....
64.jpg
67.jpg
0.JPG
P8141269.JPG
For the final assembly, I fabricated a temporary jig using colored 'tongue depressor-sized' popsicle sticks and oddly shaped 'scraps' to prop up the engine sub assembly with the same level as the walker's mechanical legs.  The legs should line up with the engine drive shaft from the previous step.

While waiting for the engine and leg sub assemblies to dry, the blaster cannon assembly was glued to the blaster cannon 'slot'  in the main turret.  You have the option to mount the cannon pointing upwards (to blast Ewoks in gliders!) or downwards.

Finally, the completed main turret assembly was glued to the desired position on the engine/gyro system sub assembly.

Fabricate a squad of walkers and go after those pesky Ewoks!!!
 
Remove these adsRemove these ads by Signing Up
impressive