Print PDF
Favorite
Email
Step 6Marquee
The system was assembled along with the controls,the monitor.
The marquee was assembled, it was made out of a plain printed paper sandwished between two layers of plexy , an old scanner lamp served as light source
A reflector was made from a cardboard tube cut in half over it´s lenght, aluminium foil was glued on the inner side of the cardboard tube facing the plexy sandwish
The hole thing was bolted together and hot glued to the oppening on top of the arcade, power was derived from the pc psu,and a small switch added to turn on/off the marquee light.
A plastic grill 5 1/4 bay covering from an old server was cut in two sanded , painted black and added as covers to the oppenings for the speakers.
The marquee was assembled, it was made out of a plain printed paper sandwished between two layers of plexy , an old scanner lamp served as light source
A reflector was made from a cardboard tube cut in half over it´s lenght, aluminium foil was glued on the inner side of the cardboard tube facing the plexy sandwish
The hole thing was bolted together and hot glued to the oppening on top of the arcade, power was derived from the pc psu,and a small switch added to turn on/off the marquee light.
A plastic grill 5 1/4 bay covering from an old server was cut in two sanded , painted black and added as covers to the oppenings for the speakers.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
